Manufacturing of Concrete Products and Precast Elements

Tipo: Libro eléctronico / E-book

Páginas / Pages: 267

Idioma / Language: Inglés

Resumen / Summary:

Autor / Author: Helmut Kuch, Jörg-Henry Schwabe, Ulrich Palzer
Editorial / Publisher: Verlag Bau+Technik
Entrega / Delivery : Nacional / International
Envio desde / Ships from: Colombia
Condición / Condition: Nuevo / New

Foreword
Introduction

1 Basic Principles
1.1 Process Fundamentals
1.1.1 Production Process
1.1.2 Components Determining the Structure of the Production Process
1.1.3 Processes for the Industrial Manufacturing of Concrete Products
1.1.4 Processing Behaviour of Concrete
1.1.5 Process Parameters
1.2 Fundamentals of Materials
1.2.1 Raw Materials for the Production of the Concrete Mix
1.2.2 Concrete Mix Design and Composition
1.2.3 Concrete Properties
1.3 Product Fundamentals
1.3.1 Concrete Products
1.3.2 Requirements Relating to Product Characteristics and
Testing Methods
1.3.3 Evaluation of Conformity
1.4 Fundamentals of Plant and Equipment
1.4.1 Vibration Exciter Systems
1.4.2 Research and Development

2 Production of the Concrete Mix
2.1 Mixing Facilities
2.1.1 Star-shaped Systems
2.1.2 Serial Systems
2.1.3 Tower Systems 7
2.2 Mixers
2.2.1 Pan Mixers
2.2.2 Open-top Mixers
2.3 Quality Control
2.3.1 Assessment of the Mixing Quality
2.3.2 Moisture Measurement
2.3.3 Mixer Control

3 Production of Small Concrete Products Overview
3.2 Block Machines
3.2.1 Technological Line
3.2.2 Configuration of Block Machines
3.2.4 Quality Control
3.3 Egg Layers
3.3.1 Scope of Use
3.3.2 Configuration and Mode of Operation
3.4 Slab Moulding Machines
3.4.1 Scope of Use
3.4.2 Configuration and Mode of Operation
3.5 Production of Concrete Roof Tiles
3.5.1 Casting Process
3.5.2 Extrusion Process
3.5.3 Quality Control
3.6 Finishing and Post-treatment
3.6.1 Finishing of Fresh Products
3.6.2 Finishing of Hardened Products
3.7 Selection Criteria

4 Production of Concrete Pipes and Manholes
4.1 Production Process
4.2 Fabrication of Reinforcement
4.3 Pipe Machines with a Stationary Core
4.4 Pipe Machines with a Rising Core
4.5 Roller-head Process
4.6 Wet-cast Process
4.7 Production of Manhole Rings and Bases
4.8 Curing and Pipe Testing
4.9 Quality Control, Characteristics of Defects
4.9.1 Typical Pipe Defects and their Causes
4.9.2 In-Process Quality Control
4.10 Selection Criteria

5 Production of Precast Elements
5.1 Overview
5.2 Basic Structure of Production Systems
5.3 Carousel Production
5.3.1 Basic Structure
5.3.2 Subsystems
5.3.3 Complete Production Lines using the Carousel Principle
5.4 Stationary Production
5.4.1 Basic Structures
5.4.2 Subsystems
5.4.3 Complete Lines for Stationary Production
5.5 Combined Production
5.6 Curing and Finishing
5.6.1 Curing Systems
5.6.2 Finishing
5.7 Quality Control
5.7.1 Design of Vibration Moulds
5.7.2 In-Process Quality Control
5.8 Selection Criteria

6 Outlook
7 Bibliography
8 Index